How to Properly Remove Surface Dirt from Commercial Induction Cooktops

Whether the panel of the commercial induction cooker is easy to hide dirt is indeed closely related to the material of its panel. Generally speaking, the commercial induction cooker panel is divided into two kinds of ceramic top plate and microcrystalline glass top plate, which are white and black respectively. Judged from a professional point of view, a good ceramic top plate has a molding, high temperature resistance, resistance to hot and cold temperature difference, strong impact resistance and other characteristics.

Because of its texture and structure of close, easy to clean, not discoloration, magnetic line penetration is sufficient, high thermal efficiency, so the better ceramic top plate is recognized by the commercial induction cooker industry for energy saving, clean “ambassador”; and microcrystalline glass top plate in the resistance to high temperatures, resistance to hot and cold temperature difference, impact resistance, heat conduction effect, magnetic line penetration, with good ceramic top plate It is hard to compare.

Because it is black, will not yellow or discoloration, the emergence of black microcrystalline glass top plate induction cooker in the past two years, so that consumers have a refreshing feeling, and follow the trend of production of such a lot of manufacturers of the top plate, the quality of the quality also varies, the commercial induction cooker manufacturers to remind consumers to pay attention to distinguish between the quality of the panel when buying.

Panel cleaning tips:

Before cleaning, please unplug the power cord from the socket and wait for the flat plate of the stove surface to cool down. If it is ceramic flat surface: when the flat plate is dirty, please use a wet rag to wipe it, or you can use stain remover or gloss powder to wipe it and then use a wet rag to wipe it again. If it is the body, control panel: use a soft damp cloth to wipe, for oil stains that are not easy to wipe, use neutral detergent to wipe and then use a soft damp cloth to wipe until no residue is left. If it is the surface of the suction/exhaust holes: Remove the dust with a cotton swab, and if it is greasy, remove it carefully with a toothbrush and a little cleaner that does not damage the utensils.

In addition, you can also use toothpaste, but some of the above cleaning can only make the blackened place to lighten, can not get rid of black dirt at all. The phenomenon of black dirt like this can not be completely removed, it is a chemical reaction. Avoid only one way to use in the future try to avoid not letting water and oil dripping to the commercial induction cooker above if dripping to immediately wipe. You can also buy a higher quality level of black panel of the commercial induction cooker, this panel is generally not easy to change color!